I have an 1841 which has an ADSL WIC installed and also a VPN module.
Having trouble finding an IOS that supports both the ADSL WIC and VPN.
Currently got c1841-adventerprisek9-mz.124-25b.bin on there but this does not seem to support the ADSL WIC as i get these errors and the ATM interface does not show up;
CFG-3-CARD_NOT_SUPPORTED: Slot 0: Unknown WAN daughter card, Part# 73-9932-6, HW-Rev 8.0, Board-Rev A0
Router#sh ip int bri
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES NVRAM administratively down down
FastEthernet0/1 192.168.1.4 YES DHCP up up
however this image does support the VPN
Cisco 1841 (revision 7.0) with 234496K/27648K bytes of memory.
Processor board ID FHK12102A30
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
The ip_base image supports the ADSL but not the VPN….
Anyone know of an IOS that supports both?
thanks
I have also tried c1841-entservicesk9 and c1841-advipservicesk9-mz
Both support the VPN but not the ADSL module… Any help would be greatly appreciated!