Hey guys,
I’ve been racking my brain with this redistribution on lab 8 of Vol 3 in the INE material. The solution they provide in the answer sheet doesn’t appear to be correct. I was wondering if anyone was familiar with this particular lab and possibly had the same issue? I can post the drawings and stuff, but I’m not having a problem getting this to work in a different way than INE suggests, I just think there might be a mistake with this lab or maybe something I’m overlooking. Just curious to see if anyone else out there using this material may have ran into the same problem on the particular lab.
Maybe I could give you a some detail to refresh your memory if you’ve been through the material:
Basically Router 4 is the breaking point, it’s learning routes from RIP, OSPF and EIGRP, but only redistributing between OSPF and EIGRP.
Okay, so if you squint you can see that R4 is located towards the bottom. It’s learning OSPF and RIP routes form R5, RIP routes from R6 and EIGRP routes from R3. R5 is running RIP on the Ethernet interface to the right and OSPF on all other interfaces. R5 is performing mutual redistribution between RIP and OSPF. R4 is running OSPF on the Frame-Relay link, EIGRP on the Ethernet interface to the left and RIP on the p-2-p link and the bottom Ethernet interface. R4 is only redistributing between EIGRP and OSPF.
The problem is that R3 (to the left of R4 in the EIGRP domain) is not going to have full reachability to all subnets in the network. R4 is not redistributing between RIP and EIGRP, so all routes learned from R6 aren’t reachable, plus the RIP routes that are coming from R5 aren’t reachable either because they’re perferred by RIP ( distance ospf external 121 on R4 to prevent loop). So I can’t see how every part of this network is going to have full reachability without adding redistribution between RIP and EIGRP?
Mudah2an hari ni bisa nyobain kombinasi RIP V2 – OSPF – EIGRP
Cisco Routing and Switching ? Re: Implimenting BGP,OSPF,RIP in a scenario: iFAS3 wants incoming traffic for Cus… http://bit.ly/huZTTK
Cisco Routing and Switching ? Re: Implimenting BGP,OSPF,RIP in a scenario: well, I can tell you about when I ra… http://bit.ly/eI5YxJ
Cisco Routing and Switching ? Re: Implimenting BGP,OSPF,RIP in a scenario: well, I can tell you about when I ra… http://bit.ly/eI5YxJ
????????????????????? FTP??????????DATA????OSPF????????????? ????RIP?OSPF????????????????FTP??????????????
????????????????????? FTP??????????DATA????OSPF????????????? ????RIP?OSPF????????????????FTP??????????????
????????????????????? FTP??????????DATA????OSPF????????????? ????RIP?OSPF????????????????FTP??????????????
???EIGRP?RIP?OSPF?????????????????????????????Wireshark?debug ip eigrp??
??????????????????????????????????????????????
RIP vs. OSPF : differences:
RIP and OSPF are routing protocols. Routing protocols build the routing tablas that… http://bit.ly/gOHet5
kembali bergulat dengan packet tracer.. RIP… OSPF.. EIGRP.. \o////
kembali bergulat dengan packet tracer.. RIP… OSPF.. EIGRP.. \o////