Hello Scott
Thanks for your time
The card that I have installed on 2611 and 2811 are
VWIC
2MFT-T1
In my case I have T1 Controller module installed in both routers , I dont understand this part
1. 2600 router T1 controller connected to frame circuit with cat 5 cable ( NO Serial Module Installed)
2. 2811 router T1 controller connected to frame circuit with cat 5 cable and serial connected to bell 56k modem (General DataComm DSU)
If I look at my routers
# show controller T1
Applique type is Channelized T1
Cablelength is long gain36 0db
No alarms detected.
Version info Firmware: 19990702, FPGA: 6
Framing is ESF, Line Code is B8ZS, Clock Source is Internal.
Data in current interval (199 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
18 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
18 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
for my understanding we have channelized T1 and externetal (CSU/DSU) connected with 2800 router with serial cable is seperateing channel (voice and Data) or sending the packet to the frame I dont know
Please Advise
Thanks for your time
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U
Datacomm 45-0069 7.1 Surround Sound 3-Gang Plate (White) Review http://goo.gl/fb/kYY8U