I have a small requirement. please see my configuration.i have an Core-switch-1 & 2 (Cisco 6509) series and now all my traffic from my network goes thorugh
Firewall 1 & 2 and then goes to MPLS cloud, where we are connected to all our clients in different locations.
My requirement is now,we are terminating a Point-to-Point link between our Core-switch1 at site A and one of our other site B, where we have prodcution server.The new link is now not passing through firewall at our end , but its terminated at the DMZ-2 switch at other end and goes through their firewall at site B.
Requirement for this PTP link is to ship log files from production server at site B to newly built servers at site A on this PTP link.
As both sites A and B are conencted throguh MPLS, we are able to ping and see the routes of that production server. We are going for this PTP link
is these log files conatins more TB’s of data to be replicated from site B to site A. So our Data Center suggested for this new PTP link exclusively to ship
log files from production server.
My doubt is like whether we can have static routes at site A and at site B. Or we need to go for PBR , as both links i.e new PTP link port and existing MPLS path where our firewall port is connected are on same same core-switch1.
If i write static routes, does the path will completely change to PTP and no traffic goes thru firewall and then to MPLS? please clarify and help me out as
i need to set-up this link by next 6 days. Your suggestions can help me out.
let me know if anyone requires anthing. Please …. Please …Please guide me on this