Hi
I am wondering why I can see no real movement on the QoS counters for the egress queue for a particular interface even though I am enabling the priority queue. I have to admit I have read the documentation on this and I dont understand it. When i make a call from a phone the ingress counters move. YAY! but not my egress counters 
I have the following configured on the interface
interface FastEthernet0/3
switchport access vlan 30
switchport voice vlan 10
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust device cisco-phone
mls qos trust cos
auto qos voip cisco-phone
spanning-tree portfast
end
and the following configured Globally
mls qos srr-queue input priority-queue 2 bandwidth 30
mls qos srr-queue input cos-map queue 2 threshold 3 3 5
and the verification commands are thus
FastEthernet0/3
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 10 0 0 0
Shared queue weights : 10 10 60 20
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 1
FastEthernet0/3
dscp: incoming
——————————-
0 - 4 : 23232 0 0 0 0
5 - 9 : 0 0 0 0 0
10 – 14 : 0 0 0 0 0
15 – 19 : 0 0 0 0 0
20 – 24 : 0 0 0 0 0
25 – 29 : 0 0 0 0 0
30 – 34 : 0 0 0 0 0
35 – 39 : 0 0 0 0 0
40 – 44 : 0 0 0 0 0
45 – 49 : 0 7243 0 0 0
50 – 54 : 0 0 0 0 0
55 – 59 : 0 0 0 0 0
60 – 64 : 0 0 0 0
dscp: outgoing
——————————-
0 - 4 : 34765 2 1 0 4
5 - 9 : 2 1 0 117 5
10 – 14 : 20 0 2 0 0
15 – 19 : 0 4 0 0 0
20 – 24 : 0 0 0 0 145
25 – 29 : 0 0 0 0 0
30 – 34 : 0 0 1 0 2
35 – 39 : 0 1 0 0 0
40 – 44 : 1 0 0 0 0
45 – 49 : 0 6763 0 1752 0
50 – 54 : 0 0 0 0 0
55 – 59 : 1 0 0 0 0
60 – 64 : 0 0 0 0
cos: incoming
——————————-
0 - 4 : 23575 0 0 0 0
5 - 7 : 0 7248 0
cos: outgoing
——————————-
0 - 4 : 13513 0 243 0 32665
5 - 7 : 26 6 0
Policer: Inprofile: 0 OutofProfile: 0